Today the KAPtery moved to its own site: KAPtery.com. This frees up my personal site (fastie.net) for other things, but most importantly offers you a much better place to learn about 3D printed camera rigs for aerial photography. The commerce part of The KAPtery should also work better — buying kits and parts should be easier and more secure.
by Chris Fastie • • 0 Comments
I almost didn’t make it to the farm yesterday because 1) one of my A590s died, 2) the old CHDK sync mode does not work with A590s, and 3) it took me a while to install and learn how to use the new CHDK. Teddy almost didn’t make it because I was not sufficiently explicit about which gate I meant and he waited at the other gate. But we were flying the Sutton Flowform 16 by 5:00 PM in a janky 15 mph north wind with gusts of 20 mph. The Titan 2 Rig made its maiden flight with two A590s triggered by an MK111 timer.
One of the A590s was full spectrum (its IR block filter had been removed), and it had a 720 nm IR filter in front of the lens. So that camera saw mostly near infrared light. I white balanced that camera on grass, and the photos have a little color in them. We took 565 pairs of visible/infrared pairs over the Middlebury College Organic Farm. The cameras were aimed straight down, but the wind was swinging the Picavet quite a bit, so we got lots of slightly oblique photos, and more than 100 of the pairs were before or after the flight part of the flight. The shutter speed on both cameras was locked at 1/800 second at ISO 80, and most of the photos were taken at f 2.8. Some of the NIR photos were taken at f 2.6 (the max aperture), but there was not much difference in exposure between the two cameras. About 80% of the photos have no conspicuous motion blur.