The following parts are included in the Pendulum Kit.
There are no 3D printed parts in this design.
Carbon shaft
The 38 cm carbon fiber shaft now comes assembled, glued, and drilled.
- 1 38 cm piece of wrapped carbon fiber tube, 7.5 mm (0.3 in.) OD
- 2 6 cm piece pultruded carbon fiber tube, 6.0 mm (0.0240 in.) OD
- 2 6 cm pieces 2 mm ABS filament
Attachment hardware
- 1 18 cm long piece of high pressure PVC tubing, OD 17/32 in.
- 2 stainless steel hairpin cotter pins, 1 3/8 in.
- 1 stainless steel hairpin cotter pin. 1 5/8 in.
- 1 vinyl coated 2 mm steel wire, ~25 cm long
- 2 white vinyl cap