
The following parts are included in the Picavet Kit.
All but the 3D printed cross are included in the Picavet Hardware Kit.
3D printed parts
- Picavet cross
Carbon shaft. The shaft now comes assembled in the full Picavet Kit. Assembly required in the Hardware Kit.
- 1 12 cm piece of wrapped carbon fiber tube, 7.5 mm (0.3 in.) OD
- 1 12 cm piece pultruded carbon fiber tube, 6.0 mm (0.0240 in.) OD
- 1 2.5 cm piece 2 mm steel rod
- 2 3 cm pieces 2 mm ABS filament
- 1 white vinyl cap
Attachment hardware
- 2 stainless steel KAP’n Hooks
- 2 stainless steel hairpin cotter pins
- 4 1 1/4 in.eye bolts, 6-32
- 30 feet of 50 pound braided dacron line
- 1 nylon ring